2HP BRIDGEPORT SERIES 1 Standard MILL 9"X42" TABLE. P/F and DRO 1979

Description

2HP BRIDGEPORT SERIES 1 Standard MILL 9"X42" TABLE. P/F and DRO 1979 - Bridgeport Series I Standard Knee Mill with 2J Variable Speed Head, 9" x 42" Table, Bridgeport X-Axis Power Feed, AcuRite II 2-Axis Digital Readout. Collet Tray and Hold Down's Holder. Wired 240V Three Phase. Excellent Condition SERIES I Range Table Travel (X-Axis, end of table to end of saddle) without Power Feed 31in. (787mm) with Power Feed 30 in. (762mm) Saddle Travel (Y-Axis) 12in. (305mm) Quill Travel 5 in. (127mm) Knee Travel (Z-Axis)* 16 in. (406mm) Ram Travel 12 in. (305mm) Throat Distance (min.) 6.75 in. (171mm) Throat Distance (max.) 18.75 in. (476mm) Table to Spindle Nose Gage Line (min.) 2.5 in. (64mm) (max.) 18.25 in. (463mm) Table Overall Size 42 x 9in. (1067 x 299mm) Working Surface 42 x 9in. (1067 x 229mm) T-slots Centers 3 @ 2.5in. (64mm) T-slot Size 0.625in. (16mm) Height above Floor (max.) 47.25in. (1200mm) Weight of Workpiece (max.) 750lbs. (340kg.) Spindle (2J Head) AC Power Rating (30 min. duty cycle) 3 HP (2.2 kW) (continuous) 2 HP (1.5 kW) Spindle Taper R-8 Tooling R-8 Collets Speed Range High (infinitely variable) 500 – 4200 RPM @ 60 Hz Low 60 – 500 RPM @ 60 Hz Power Quill Feed (3) 0.0015 in./rev (0.038mm) 0.003 in./rev (0.076mm) 0.006 in./rev (0.152mm) Drilling Capacity Power Quill Feed 3/8 in. (9.5mm) Milling Capacity (mild steel) 2 CI/min. Boring Range (mild steel) 6 in. dia. (152mm) Spindle Diameter 1.875 in. (48mm) Quill Diameter 3.375 in. (86mm) Positioning Feedrate Range (X, Y) 0.50-35 ipm (13-889mm/min) Minimum Increment 0.0001in. (0.003mm) Space and Weight Floor Area 8.3 x 7.8 ft. (2.53 x 2.4m) Height 87 in. (2.21m) Net Weight 1930 lb. (875kg) Shipping Weight 2075 lb. (941kg) Power Input Power 208/230/460 volts 3 phase, 50/60 cycle Power Capacity 4kVA
***Please Read Everything Below Before Buying***
No International or APO / FPO Shipping. Additional charges may apply to AK & HI or residential freight shipments.
If it is not pictured or described, please do not assume it is included.
All specifications are believed to be accurate but are subject to verification by the buyer.
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. Please contact us with any specific requests or questions. We do not have everything listed as we are always receiving new inventory. If you need anything, please contact us.
WE ARE A PROUD MEMBER OF THE MDNA.