Bridgeport J Head Milling Machine, 1HP, 9-42" Table, Fully Cleaned and Restored

Description

Bridgeport J Head 1HP Milling Machine
Fully disassembled, cleaned, and restored. 9x42" Table
New parts (all from H+W):
Split nuts for both lead screws
"Top Half Rebuild kit," new belts and all new bearings in the pully housing.
Top gear case packed with grease instead of oil
New spindle oil strainer
Felt wipers for all ways
Collet alignment screw
Filters for one shot lube system
All new oil lines
New power downfeed trip lever
It has the oldest geared Bridgeport powerfeed, but no motor to drive it. It has a Bijur one shot lube system, that I also took apart, cle
aned, and filled with fresh oil. The power downfeed works great, very smooth. I have videos of everything in operation that I can send. Great old machine, missing a little paint but good working condition.
Gibs are shimmed, and when the gibs are fully tight, wear in the ways limits the table and saddle travel. It has a travel of ~19" longitudinal, and ~8" cross travel. One might be able to adjust the gibs, or remove the shims. The machine still holds great tolerances within its reduced travel, in my limited experience.
Feel free to reach out with any questions, or to set up a time to look at the machine in person.
Sold as is, buyer must coordinate pickup. My business has a forklift and I can help load.