Customized Remote control Battery Power Motorized Electric Blackout Roller Shade

Description

The best choice for motorized roller shades or blinds, there is no wall power outlet needed. Top quality at the low price! Limited time offer!
This is completed set of made-to-order motorized roller shades. We cut the fabric to your chosen size and attach it to aluminum(not plastic type) rod and weight bar. It is ready
to go kit. You just install it with a screwdriver.
The motor kit comes with built-in rechargeable Li-ion Battery, charger, mount brackets, remote, drive kits, and instruction manual. The motor control board was newly designed for energy saving. It is a great choice for where is power unavailable installation. Plug and play style; no wiring job is required. One fully charged rod can last up to 9 months(depend size and how often to use). It also can be powered with optional solar panel which it is designed for.
How to order:
select your window width and length in
the range of selection
.
Make a note for the exactly width and length accuracy to 1/8 and inside or outside mount when you place the order or message us after placing your order. We will make it to fit. Dimension subject to 1/4'' tolerance within 60", and 1/2" over 60".
We will make the way that you want to. We also have light filtering and solar mesh shades.
Features
Built-in high-quality Rechargeable Lithium Battery, no wiring work at all.
Slim design prevents sunlight from coming through from the installation gap (1/2" on each side)
Programmable 3 electronic limits: 2 upper/lower positions and 1 optional  middle favor position
Can be mounted on both ceiling and wall, or any other angled surface
The remote does not require line of sight. Works through walls or other obstructions, perfect for across rooms
The motor runs quietly and remains silent on standby
Group control to roll multiple shades up or down simultaneously
Stops at any position once by pressing "STOP" button
No need to set up limit switch and programming upper/lower position is easy
Double hall feedback sensor for precise position
Low power consumption, easily works with solar panel (not included)
Specifications
Power sources: Built-in 9V Rechargeable Lithium Battery
Protection Class: IP44
Rated RPM: 26
Rated Torque: 9.74in.lb (1.1N.M)
Frequency: 866MHz
The minimum width of assembled motor kit: 18 1/2"
Working tube size: 1 1/2" (38mm)
Maximum load with 1 1/2" tube < 12lbs (5Kgs)
Mount: minimum 2.5 inch depth required for inside mount
Material: Polyester
Can be installed both wall and ceiling mount
Fabric information:
Blackout shades are a great choice for privacy and darkness in your rooms. Blackout fabric is thermal coat for superior blackout capabilities, blocks UV rays, reduces heat transmission to keep rooms cool in summer and warm in winter. In order to ensure quality and low cost, we only supply the following most popular shade fabric. Other color is available. For large customized orders with specific requirements for fabric other than listed here please contact us.
Frequently Bought Together:
If you want light filter fabric, please check eBay item 313402970942
If you want
solar mesh fabric, please check eBay item 313430090390 or item
313400083113
White:
Model: B111-WS
Composition: Polyester, Acrylic coating back
Color: White with woven stripe texture
Back Color: White
Openness:  0%
UV Blockage: 100%
Max Fabric one of Width/Length: 88"
Fabric Weight: 7.37 oz/yard
2
Model: B112SBG
Composition: Polyester, Acrylic coating back
Color: Tan, light brown with mixed woven texture
Back Color: White
Openness:  0%
UV Blockage: 100%
Max Fabric one of Width/Length: 90"
Fabric Weight: 7.37 oz/yard
2
How to measure:
Inside Mount:
mount inside the window casings, and do not cover the window moldings.
Measure the exact width of the window frame opening in two places at top and bottom. Round down measurements to the nearest 1/8"inch (or 1mm).
Measure the height of the window frame opening. Round up measurements to the nearest 1/8"inch (or 1mm).
Note:
Do not deduct bracket and drive space from your measurements, we will make sure that they will fit.
Outside Mount
: mount on the walls or trims and covers the window moldings or size of place that you prefer to be covered.
Measure the width of the window frame in two places at top and bottom. Round up measurements to the nearest 1/8"inch (or 1mm).
Measure the height of the window frame. Round up measurements to the nearest 1/8"inch (or 1mm).
Note:
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. However, this is not a rule other than that shade can cover the opening for your personal preference. We usually add 1/2" on each side for outside mount.
Package Content
One tubular motor CL625E-0126-ESB Kit
One RF remote
One overcharge protection charger
Mount brackets for both ceiling and wall
One customized roller shade
Instruction booklet
Note:  It will take 2 to 5 business days to produce the shade(S). Will email you tracking # once shipped out.