EMCO FB-2 Gear 47 Part #E3A-015-000 Replacement Gear 3D printed

Description

Untitled Document
For EMCO FB-2 Milling Machine
Please check out our other items.
This gear is a replacement for the Gear 47 on the EMCO FB-2 Milling machine.
This listing is for the bare gear as shown in the listing.
Please contact with any questions.
Features
The assembled gear and hub, and the damaged gear are shown to show before and after repair.
It will take a minimum of a 1-ton arbor press to remove the old gear.
The hub is splined. Thoroughly clean the hub removing all the last remaining bits of the original gear.
Place a small bead of CA into the recess on the face, and a thin bead around the inner diameter of the replacement gear. It will not take much as it is a press fit. Press firmly, making sure the gear is solidly supported.
Reassemble your mill and make some chips.
If you choose for us to repair your gear, upon purchase you will be able to send us the gear and we will return free shipping. We can usually do a 2 day turn around.
Shipping
These kits are available for same day shipping if order is received by 2PM eastern time. After 2:00PM will be on next day shipping