GG2 - Ghost Gunner 2

Description

Ghost Gunner 2. Condition is "Used".
Machine works normally and I have had no issues with operation. Has a cosmetic scrape on base plate -operator error- loose spindle broke - my fault.
Machine can be used for CNC milling and Engraving.
Machine includes end mill bit and tools. Multiple jigs included - both AR308/AR15.
Machine comes with power supply and connection cable to computer
DD Software (current) is included - USB stick
All original material is included: Ghost Gunner 2 CNC, 6’ USB A-B cable, 6’ NEMA 5-15/IEC C13 three prong power cable, DD USB drive, 17mm wrench, 12mm wrench, 3mm ball-end allen wrench, 5/32″ allen wrench, and ER11 collet nut.
A hand reamer is included for tapering/removing the coated lower receiver grip screw hole. The machine with need a proper ground to operate. The raw receivers will not need this process.
End Mills dull over time and are considered a consumable. With proper use, end mills should manufacture approximately 8 to 10 AR pattern lowers before needing to be replaced. I have include some used end mills -approx. 45% usage. See https://ghostgunner.net/featured-products/#tooling for ordering.