Manual Hydraulic Lubricating Oil Pump Oiler For Cutting Milling Machine 600CC

Description

Store category
Sign Up Now !
You may also like
Manual Hydraulic Lubricating Oil Pump Oiler For Cutting Milling Machine 600CC
Product Description
Shipping notice
Can not ship to Puerto Rico,Alaska/Hawaii
Power Source
Hydraulic
Function
Milling
Model
HP-5R
Machine Type
Milling Machine
Max Press
5 (kgf / cm2)
Outer
2-5 (ml / min)
Capacity
600CC
Brand
Unbranded
Control
Manual
The hand pump is an oil draining process when the handle is pulled, and an oil sucking process when the handle is reset. The pump has two oil outlets, which can be used simultaneously or optionally. The combination of the pump and the splitter can better exert the lubrication effect, and is suitable for the use of machine tools at the refueling point, such as punches, lathes, etc.
Type: right hand press / left hand press
Max Press: 5 (kgf / cm2)
Outer: 2-5 (ml / min)
Capacity: 600CC
Connect for 4mm tube
Note This listing is for right hand press (HP-5R)
Use and adjust:
1. The ambient temperature of the oil pump is -5 to 40 degrees Celsius,
Use medium: N22 ~ N68 lubricating oil at normal temperature.
If the ambient temperature is low or high, consider using a lubricant with an actual viscosity.
2. This manual lubricating pump is an intermittent operation device. After pulling down the handle, the piston is pushed to lubricate the oil. After the handle is loosened, it relies on a compression spring to reset and store the oil by itself. The user can determine the number of oil pressures to ensure adequate lubrication of the equipment according to the number of lubrication points or the amount of oil used at the lubrication points.
3. During the first use, pull the oil pump several times to fill the oil pipes to the main line of the oil separator and the oil separator to the lubrication point branch line with oil, and exhaust the air in the oil tube. Only access to the lubrication point.
Installation and maintenance:
1. The oil pump should be installed horizontally, and it should be avoided in the environment with corrosive gas, dust and high temperature.
2. JFN, JFK series resistance oil separator restricts and changes the oil flow through the orifice. The smaller the number on the oil separator, the smaller the orifice diameter. The oil separator with a small orifice diameter should be placed relatively close to the oil pump, and vice versa. This makes the amount of oil output relatively uniform.
The tubing can use ￠ 4 or ￠ 6 nylon or copper pipes.
When taking over:
1. Do not flatten the tubing or damage the outer wall of the tubing, and remove the dirt inside the tubing.
2. When installing the copper pipe, first insert the oil pipe connector into the oil pipe, and then insert it into the double cone ferrule to insert the connector. At this time, the front end of the oil pipe should be exposed to the ferrule 2-3mm, and the pipe end should be close to the joint body and then screwed Move and tighten the tubing joint.
3. When using a nylon tube and installing it on a flared joint, the cut should be at a right angle. You must first insert the screw sleeve into the nylon tube. When the nozzle is inserted into the tapered surface, it should exceed the tapered surface stop and then twist the screw sleeve by hand. Tighter.
4. The pipeline should be slightly loose, and the bending radius is generally not less than 10 times the outer diameter of the pipe.
5. Remove the bottom drain port screw at least once every six months to clean the fuel tank.
Package:
1 HP-5R pump
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Aug-25-21 at 20:22:20 PDT, seller added the following information: