NEW 3" x 2.95" Lock Down Precision Milling Machine Vise Without Base

Description

Dimensions Jaw Width: 3"
Jaw Opening: 2.95"
Jaw Height: 1"
Weight: 13 Lbs
Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base
Vise Key: 11.11mm table slot width, 12.00mm base width
Product features
NEW 3" x 2.95" Lock Down Precision Milling Machine Vise Without Base
Dimensions Jaw Width: 3"
Jaw Opening: 2.95"
Jaw Height: 1"
Weight: 13 Lbs
Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base
Vise Key: 11.11mm table slot width, 12.00mm base width
Product features
Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.
Highest clamping power. It's very accurate and durable
Sliding surface of the vise bed is flame hardened and ground
Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI
With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable
Acme screws and easy to read 0-360 deg scales
Screws from the top through the jaw make the vise more stable and durable. Taiwan new type
Four setting positions of the jaw plates are available, widening the jaw plates opening.
Item Specifics
Brand
labwork
MPN
LAW63510
UPC
Does not apply
Payment
We Accept Paypal Only.
Shipment
Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .
Delivery time :
When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.
Warrenty & RMA
Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.
Service & Contact
We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.
[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
Headlight
Suspension
Window Visors
Shop Category
Store Home
Suspension & Steering
Lighting & Lamps
◈  Fog Lights
◈  Xenon Headlight Ballast
◈  Headlight
◈  Fog Lamps cover
◈  Turn Lights
◈  Brake Lights
◈  Truck Light Strip
◈  Moto Lighting & Lamps
◈  Others
◈  Tail Lights
Carburetor
◈  Lawn Mowers Carburetor
◈  String Trimmers Carburetor
◈  Blower Carburetor
◈  Snow Blower Carburetor
◈  Snowthrower Carburetor
◈  Saw Carburetor
◈  Tractor Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
◈  Golf Carburetor
◈  Gasket
◈  Rebuild kit
◈  Intake Manifold Boot
Boat
◈  Steering Shaft Pin
◈  Yacht Light
◈  Others
Radiators
Fans & Kits
Auto Valve
◈  Pressure Relief Valve
◈  Air Idle Valve
◈  VVT Valve
◈  Transmission Solenoids
◈  Control Valve
◈  Transmission Solenoids Valve
◈  EGR Valve
◈  Selector Valve
◈  Others
Motorcycle Valve
◈  Motorcycle Solenoid Valve
◈  Motorcycle fuel Switch Valve
Module
◈  Headlight Driver Module
◈  Fuel Pump Module
◈  Fan Control Module
◈  Others
Fule Injector
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  Clutch & Clutch Parts
◈  Motorcycle Hand Brake Handle
◈  Motorcycle Brake Cable
◈  Motorcycle Brake Pads
◈  Others
Car Repair Kit
Auto Engine System
◈  Valve Cover & Gasket
◈  Oil Cooler
◈  Engine Timing Cover
◈  Thermostat
◈  Turbine Cover
◈  Machine Oil Can
◈  Automobile Heaters&Accessories
◈  Engine Coolant Recovery Tank
◈  Hydraulic Roller
◈  Glow Plug
◈  Tilt Trim Motor
◈  Engine Rocker Arm Shaft Sleeve
◈  Valve Cover Breather
◈  Oil Scale
◈  Coolant Water Inlet Pipe
◈  Others
Auto Ignition System
◈  Car Ignition Coil
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Car Ignition
◈  Car Ignition Module
Auto Hub
◈  Locking Hub
◈  Hub Bearing
◈  Wheel Spacers Adapters
◈  Others
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
◈  Motor Electromagnetic Starter
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Others
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Eccentric Shaft Actuator
◈  Hood Catch
◈  AC Blower Motor
◈  Clutch Actuator
◈  Fuel Door Opener Actuator
◈  Others
Auto Motor
◈  Power Window Lift Motor
◈  Transfer Case Gear Motor
◈  Front Running Board Motor
◈  Blower Resistor
◈  Others
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Throttle Body
◈  Power Brake Booster
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Auto Circuit Wiring Harness
◈  Airbag Hairspring
◈  Positive Battery Cable
◈  Sensor Harness
◈  Body Wiring Harness
◈  Gear Shift Control Cable
◈  Battery Terminal
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
◈  Belt
◈  Steering Power Hose
◈  Others
Auto Switch
◈  Door Power Window Switch
◈  Neutral Safety Switch
◈  Combination Lever Switch
◈  Others
Motorcycle Control System
◈  Gearbox Shift Line
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Thumb Oiler
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Mass Air Flow Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Air Pressure Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  ABS Wheel Speed Sensor
◈  Fuel Pressure Sensor
◈  Crankshaft Position Sensor
◈  Oil Pressure Sensor
◈  Camshaft Position Sensor
◈  Ride Height Sensor
◈  PDC Sensor
◈  MAP Sensor
◈  Exhaust Pressure Sensor
◈  Coolant Temperature Sensor
◈  Acceleration Sensor
◈  Others
Motorcycle Pump
◈  Fuel Pump
◈  Brake Calipers
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Trunk Cargo Cover Security Shi
◈  Sunroof Sunshade Corn
◈  Armrest Center Box Cover
◈  Cup Holder
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Cigarette Lighter
◈  Storage Box
◈  Others
◈  Seat Covers
◈  Floor Mats
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors
◈  Auto body trim panel
◈  Front bumper trim
Auto Pump
◈  Fuel Pump
◈  Water Pump
◈  High Pressure Fuel Pump
◈  Air Pump
◈  Power Steering Pump
◈  Clutch Master Cylinder
◈  Oil Pump
◈  Others
Computer Parts
◈  Others
Cell phone Parts & Components
Tablet PC Components
Home & Garden
◈  Sports Goods
◈  Yard, Garden & Outdoor Living
◈  Others
Business & Industrial
◈  Industrial Control Module
▷  CNC
♢  Edge finder
♢  Drill Bits
♢  Spring Collet
♢  Boring Bar
♢  Mandrel
♢  Collet Chuck
♢  Pull Stud
♢  Quick Change Tool Post
♢  Drill Chuck
♢  Drill Chuck Arbors
♢  Live center
♢  Vise
♢  Milling Arbor
♢  Reamer
♢  Blocks
▷  Hand Tools
♢  Rivet Gun
♢  Wrenches
♢  Hydraulic Crimper
♢  Balance Level
♢  Drill Bits
♢  Outside Micrometer
♢  Casters
♢  Other
▷  Metalworking Supplies
♢  Metal Cut Off Wheels
♢  Flap Discs
♢  Hose Clamp
♢  Welding Wire
♢  Cable
♢  Piston Driver
▷  Generator Accessories
♢  Automatic Voltage Regulator
♢  Generator Carburetor
A/C Compressor & Clutch
◈  A/C Compressor Clutch
◈  A/C Compressor
Other
Hot Item
NEW Plastic Plant Flower Pots Nursery Seedlings Pot Plant 100Pcs
USD 14.80
Carburetor for Briggs&Stratton 20HP 21HP 23HP 24HP 25HP intek V-Twin Engine Carb
USD 27.97
Carburetor 18.5HP For Briggs Stratton Craftsman LT1000 LT2000 DYT4000 Z225 NJ
USD 15.20
Carburetor For Briggs Stratton INTEK 206cc 5.5 HP 6.5HP OHV 3500 Watts Generator
USD 9.88
Carburetor For Echo SRM-225 GT-225 PAS-225 PE225 PPF225 SHC225 SRM225U Trimmer
USD 13.67
New List Item
Carburetor Carb Part Assembly For Generac ix2000 0H43470146
USD 42.12
Carburetor For Ariens ST824SLE ST824DLE Snowblower 924108 924110 924328 Carb
USD 12.83
7DX-E4101-11-00 CARBURETOR FIT FOR YAMAHA EF2000ISC EF2000ISCH EF2000 GENERATOR
USD 63.22
New Diode Kit Rectifier SSAYEC432 With Surge Suppressor For Leroy Somer
USD 29.16
RSK6001 Diode Rectifier Kits For Stamford Generator Genset Spare Parts
USD 31.66
NEW 3" x 2.95" Lock Down Precision Milling Machine Vise Without Base
Dimensions Jaw Width: 3"
Jaw Opening: 2.95"
Jaw Height: 1"
Weight: 13 Lbs
Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base
Vise Key: 11.11mm table slot width, 12.00mm base width
Product features
Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.
Highest clamping power. It's very accurate and durable
Sliding surface of the vise bed is flame hardened and ground
Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI
With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable
Acme screws and easy to read 0-360 deg scales
Screws from the top through the jaw make the vise more stable and durable. Taiwan new type
Four setting positions of the jaw plates are available, widening the jaw plates opening.
Payment
Shipment
Warrenty & RMA
Service & Contact
We Accept Paypal Only.
Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .
Delivery time :
When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.
Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.
We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.
[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
All rights reserved.