Precision Vertical Turret Milling Machine SP-520EVS NST#40 Spindle

Description

*
Super Precision Turret knee-type milling machine, high quality made in Taiwan·
*
220V 5HP 3 Phase inverter spindle motor with 5HP Delta Driver, Electronic variable speed, NST#40 spindle,  11 X 58” Table
X Longitudinal axis (X-axis) Align SP-500X power feed installed.
* Cross power feed Align AL-500Y, Knee powered by lifting motor with electrical box and operation panel, NST#40 Power drawbar all included.
* Coolant system, Coolant Tray, Auto Lube system, Quartz Work Light all included.
*
Spindle Material SCM415(SAE4115) Cr-Mo Alloy steel with tempering treatment, full Hardened & Ground, spindle run-out:0.0002”
*
Centralized Auto lubrication system for ways, nuts and lead screws of axes
*
Precision angular contact spindle bearing
*
Uniquely designed high-low gear speed.
*
Adjustable brake handle increases the
life of the brake shoe
*
Extra long spindle (650mm) support to the table provides high accuracy & rigid machining
*
Turcite-B coated XY ways
*
Square way on Y axis  16" travel, Square way on column, heavy duty structure
*
Hardened & Ground Table with Ground T-slot.
*
Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
*
Hardened & Ground X&Y Slide-ways.
*
Electroless Nickel-Phosphorus Process On X&Y leadscrew with hardness 35 HRC
*
Highly Improved Variable-Speed Head.
Licensed Meehanite Casting
*
Rubber chip cover (front & rear )
*
1-1/2”(38mm) Diameter Lifting Screw.
*
Leveling Screw & Plate On Base.
Specification:
Table:
11” x 58” (280 x 1473mm)
T-Slot No.x Size:
3” x 0.629” (3 x 16mm)
Longitudinal travel (W/O power feed ):
38” (965mm)
(With power feed ):
34.5” (876mm)
Cross travel:
15-3/8” (390mm)
Travel of knee:
15-3/8” (390mm)
Ram travel:
22” (560mm)
Quill travel:
5” (127mm)
Table to spindle nose (D):
4”
—
20” (100-506mm)
Over swivel on turret:
360
º
Head Swivel ( R & L ):
+
45
º
Head tilt ( UP & DOWN ):
0º
Spindle to column (F):
6.25”-28.3” (159-719mm)
Spindle motor:
5HP
Spindle taper:
NST#40
Quill feed:
0.0015” - 0.003” - 0.006”
Spindle Speed (r.p.m.):
( 60Hz) 60-5000 rpm Electronic Variable Speed
Overall height (A):
87” (2211mm)
Overall depth (B):
82” (2087mm)
Overall width (C):
72.4” (1840mm)
Net Weight:
3600 lbs. (1300 Kgs)
Machine is setup with accepting 220V 3 Phase power supply.
Coolant system, Coolant tray, Auto Lubrication Pump, Quartz work light all included
XY power feeds and Knee with lifting motor are included, XY 2-axis Newall DP700 DRO will be included after placing order. Power drawbar is included in the price.
Top quality from Taiwan professional milling machine builder. "Avemax / www.milling.com.tw   or www.manford.com.tw