TEGARA 5" 550V CNC Milling Machine Vise 0.0004" NEW R[

Description

SHARS 5" 550V CNC Milling Machine Vise 0.0004" NEW
Note: The picture is 440V picture, is not this 550V picture, but their exterior looks the same.
Product Code
202-0992
Product description
Jaw Width: 5"
Jaw Opening (Inner Jaw): 5"
Jaw Opening (Outer Jaw): 12.50"
Jaw Height: 1-1/2"
Bed Height: 2.50" +/-0.0005"
Jaw Plate Threads: 3/8"-16
Jaw Plate Threads Spacing: 3.125"
Clamping Repeatability: +/-0.0004"
Weight: 50 Lbs
Product features
550V Advantage
CRAFTSMANSHIP
Micron Lapping
A gang of vise body gone through time consuming grinding process with micron accuracy on a CNC grinder
Eye Inspection
Each vise body will be put under the microscope to filter out unsatisfying cast iron bodies before assembling
Smooth Movement
Semi-hardened bright finished lead screws with precision turned threads to give them a solid & smooth feel when turning the vise handle
PRODUCT SPOTLIGHT
Minimum Jaw Lift
Every machinist is afraid of the term "jaw lift" when associated with a vise. The 440V offers key improvements to prevent jaw lifting by using a 45 degree wedge and a pivoting ground finished steel hemisphere in a milled pocket to hold down the movable jaw. This results a minimal amount of jaw lift applying under pressure when comparing to other highly regarded go-to branded vises.
7.01" Opening Capacity
7.01" Opening capacity allows more clamping in a small footprint.
Hardened Vise Bed / Jaw Plate
-Vise jaw plate threads and spacing meets the industry standards
- Bedways are flame hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height and the distance between keyway and stationary jaw remains the same and meets the industry standards
- Bed height matched to 2.875" +/- 0.0005"
- Vises' bed parallel to base within 0.0005"
- Fixed Jaw perpendicular to bed within 0.0005"
- Fixed jaw parallel to vise's keyway within +/- 0.0005"
Brush Seal
Continuing from the design feature in 690V vises, a brush on both end of spindle nut to wipe off chips to improve & extend the lead screw life.
Large Chip Evacuation
2 large chip evacuation slots are strategically located on each side of the vise to allow a good flow of chips while at the same time not diminishing the vise’s body strength. The vise body is also reinforced with a thicker rib to support the pulling mechanism when clamping
Matching Bed Heights
When ordering multiple vises, the bed heights will be matched within .0001" at no additional cost (subject to inventory stock availability)
Warranty
Tegara vise comes with 10 year limited warranty against defects in material and workmanship for the life of the product or part. (The life of the product or part is defined as that point in time when such item no longer functions due to normal wear and tear). Failure to properly maintain and/or properly operate the product or part under normal conditions will void this warranty. This warranty does not cover any product or part that has been worn out, abused, heated, ground or otherwise modified, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.
Product includes
Polish Handle
2 pc of 1/2" T-slot Keys
Inspection report
PARTS LIST
550V-19
550V-6-7
550V-14
O RING
VISE NUT AND BRUSH PAIR
JAW PLATE - ONE PAIR
550V-2-3-5
550V-KEY1
550V-4
MAIN SCREW+COLLAR+COLLAR SET SCREW
VISE KEY 5/8"
VISE BEARING THRUST COLLAR
Relate product
550V VISE KEY   550V-KEY1
.00
We have other VISES and Milling Machine available at
My Ebay Store
:
All Available to Ship NOW! at Fixed Prices
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.