VEVOR 220V Power Feed Milling Machine Al-310S X-Axis Torque 450 In-lb 200PRM

Description

Document
Product Description
Features & Details
【X-AXIS POWER FEED】- Power Feed X-Axis, Voltage: 220V, 60Hz, Rotate Speed: 200 Rpm, Max Torque: 450 in-lb, Max Feed Rate: 650mm/min, Max Return Speed: 850mm/min, Dimension: 8 x 4.5 x 13 inches.
【QUIET & RAPID OPERATION】- With speed adjust knob, speed can be adjusted according to operator's requirement, ranging from 0-9. Jog switch should be at "FEED" position. For jog movement,  just switch to "0" position. Kept holding the switch until it travels to requires position.
【DURABLE & LONG LASTING】- Safe design helps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity.
【ERGONOMIC DESIGN】- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics.
【EASY SETUP】- Small volume and easy installation,noiseless direction changes. Fit almost any vertical knee type milling machine with the 5/8" shaft end.
Key Features
Milling Machine Power Feed
Power Feed X-Axis, Voltage: 220V, 60Hz, Rotate Speed: 0-200 RPM, Max Torque: 450 in-lb, Max Feed Rate: 650mm/min, Max Return Speed: 850mm/min, Dimension: 8 x 4.5 x 13 inches.
Variable Speed
Rotate Speed: 0-200 RPM, Max Feed Rate: 650mm/min. Milling machine power feed features noiseless direction changes and direction control knob for easy and rapid operation.
Durable & Reliable
The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Power table feed won't vibrate or strain in low speed.
Ergonomic Design
Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics.
Effortless To Install
Dimension: 8 x 4.5 x 13 inches. This small volume and easy installation X-axis power feed is designed to automate the feeding process on Bridgeport type milling machines
Wide Application
Suitable models including vertical turret milling machine, drilling and milling machine and other machinery.
220V Power Feed Milling Machine With Rotate Speed 200
Rpm
Our brand new Mill Power Feed featuring Max. rotate speed 200Rpm, power torque 450 in-lb and Max. feed rate: 650mm/min,  similar knee type milling machines, including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First...etc.
X-Axis Power Feed
Quiet & Rapid Operation
Durable & Long Lasting
Ergonomic Design
Easy Setup
Specification
Voltage: 220V, 50Hz
Rotate Speed: 200 RPM
Max Torque: 450 in-lb
Max Feed Rate: 650mm/min
Max Return Speed: 850mm/min
Power Source
: Electric
Function
: Milling
Control
: Manual
Machine Type
:
Milling
Machine
Dimension: 8 x 4.5 x 13 inches
Gross Weight: 16.5 lbs
Package Content
1 x Power Feed For Milling Machine
8 x Adjustable Pad
2 x Travel Stop Assembly
1 x Adapter
1 x Bevel Gear
1 x Dial Nut
1 x Locking Nut
1 x Product Manual
Power Feed Milling Machine
Power Feed Milling Machine
Power Feed Milling Machine
Power Feed Milling Machine
Power Feed Milling Machine
Max. Torque
135 Lbs
150 Lbs
150 Lbs
150 Lbs
450 Lbs
R.P.M.
0-210 RPM
0-200 RPM
0-200 RPM
0-200 RPM
0-200 RPM
Type
X Axis
X Axis
X Axis
Y Axis
X Axis
Voltage
110V
110V
220V
110V
110V
Machine Type
Milling Machine
Milling Machine
Milling Machine
Milling Machine
Milling Machine
Power Source
Electric
Electric
Electric
Electric
Electric
Control
Manual
Manual
Manual
Manual
Manual
Function
Milling
Milling
Milling
Milling
Milling
SHIPPING
ABOUT US
PAYMENT
RETURNS
CONTACT
WARRANTY
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
California Warehouse: City of Industry, CA
Texas
Warehouse
:  Houston, TX
Kentucky
Warehouse
: Hebron, KY
New Jersey
Warehouse
: Perth Amboy, NJ
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
220V Power Feed Milling Machine With Rotate Speed 200
Rpm
Our brand new Mill Power Feed featuring Max. rotate speed 200Rpm, power torque 450 in-lb and Max. feed rate: 650mm/min,  similar knee type milling machines, including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First...etc.
X-Axis Power Feed
Quiet & Rapid Operation
Durable & Long Lasting
Ergonomic Design
Easy Setup
Key Features
Milling Machine Power Feed
Power Feed X-Axis, Voltage: 220V, 60Hz, Rotate Speed: 0-200 RPM, Max Torque: 450 in-lb, Max Feed Rate: 650mm/min, Max Return Speed: 850mm/min, Dimension: 8 x 4.5 x 13 inches.
Variable Speed
Rotate Speed: 0-200 RPM, Max Feed Rate: 650mm/min. Milling machine power feed features noiseless direction changes and direction control knob for easy and rapid operation.
Durable & Reliable
The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Power table feed won't vibrate or strain in low speed.
Ergonomic Design
Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics.
Effortless To Install
Dimension: 8 x 4.5 x 13 inches. This small volume and easy installation X-axis power feed is designed to automate the feeding process on Bridgeport type milling machines
Wide Application
Suitable models including vertical turret milling machine, drilling and milling machine and other machinery.
Specification
Voltage: 220V, 50Hz
Rotate Speed: 200 RPM
Max Torque: 450 in-lb
Max Feed Rate: 650mm/min
Max Return Speed: 850mm/min
Power Source
: Electric
Function
: Milling
Control
: Manual
Machine Type
:
Milling
Machine
Dimension: 8 x 4.5 x 13 inches
Gross Weight: 16.5 lbs
Package Content
1 x Power Feed For Milling Machine
8 x Adjustable Pad
2 x Travel Stop Assembly
1 x Adapter
1 x Bevel Gear
1 x Dial Nut
1 x Locking Nut
1 x Product Manual
Power Feed Milling Machine
Power Feed Milling Machine
Power Feed Milling Machine
Power Feed Milling Machine
Power Feed Milling Machine
Max. Torque
135 Lbs
150 Lbs
150 Lbs
150 Lbs
450 Lbs
R.P.M.
0-210 RPM
0-200 RPM
0-200 RPM
0-200 RPM
0-200 RPM
Type
X Axis
X Axis
X Axis
Y Axis
X Axis
Voltage
110V
110V
220V
110V
110V
Machine Type
Milling Machine
Milling Machine
Milling Machine
Milling Machine
Milling Machine
Power Source
Electric
Electric
Electric
Electric
Electric
Control
Manual
Manual
Manual
Manual
Manual
Function
Milling
Milling
Milling
Milling
Milling
Features & Details
【X-AXIS POWER FEED】- Power Feed X-Axis, Voltage: 220V, 60Hz, Rotate Speed: 200 Rpm, Max Torque: 450 in-lb, Max Feed Rate: 650mm/min, Max Return Speed: 850mm/min, Dimension: 8 x 4.5 x 13 inches.
【QUIET & RAPID OPERATION】- With speed adjust knob, speed can be adjusted according to operator's requirement, ranging from 0-9. Jog switch should be at "FEED" position. For jog movement,  just switch to "0" position. Kept holding the switch until it travels to requires position.
【DURABLE & LONG LASTING】- Safe design helps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity.
【ERGONOMIC DESIGN】- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics.
【EASY SETUP】- Small volume and easy installation,noiseless direction changes. Fit almost any vertical knee type milling machine with the 5/8" shaft end.
SHIPPING
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748
Texas
Warehouse
: 300 W Airtex Blvd, Suite 200, Houston, TX 77090
Kentucky
Warehouse
: 2125 Gateway Blvd, Hebron, KY 41048
New Jersey
Warehouse
: 1000 High Street, Perth Amboy, NJ 08861
ABOUT US
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
PAYMENT
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
RETURNS
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
CONTACT
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
WARRANTY
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
On Jul-20-21 at 06:52:06 PDT, seller added the following information: