-40%
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A
(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A

(Qty 2) H&R Mfr. 12″ Tongue & Groove Square Soft Lathe Chuck Jaws Alum HR-478-A

$ 20.03

Availability: 74 in stock
  • MPN: HR-478-A
  • Condition: New – Open box
  • Material: Aluminum
  • Brand: H&R Manufacturing
  • Jaw Type: Soft Jaw
  • Country/Region of Manufacture: United States

    Description

    This is a lot of 2 jaws as shown.  The paper label says these are 452-A but they are 478-A which is inscribed on the sides.  They are new but they haven't been in a box and therefore show noticeable wear on the corners and edges.  I don't see anything that would impact the performance though.  Please check out the photos for what is included.
    Jaw Type
    Square
    Material
    6061 Aluminum
    Jaw Interface Type
    Tongue & Groove
    Maximum Compatible Chuck Diameter (Inch)
    12
    Overall Height (Inch)
    3-7/8
    Groove Width (mm)
    0.5in
    Distance Between Mount Hole Centers (Inch)
    2.5 in
    Fastener Size
    1/2 in
    Tongue Width (Decimal Inch)
    0.7500
    Jaw End Shape
    Square
    Overall Width/Diameter (Inch)
    1-3/4
    Overall Length (Inch)
    4-7/8